 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| V VKP100MTC OBSOLETE PRODUCT Output, Half Brick DC/DCSeries 100 Watt, Dual/Triple Ou Dual/Triple u e Converter Contact Factory for Replacement Model FEATURES FEATURES T S R HS COMPLIA ROHS COMPLIANT L 33 - 75V INPUT RANGE 2.3" X 2.4" X 0.5" USER CONFIGURABLE AS A SINGLE, DUAL OR TRIPLE OUTPUT EACH CHANNEL INDEPENDENTLY CURRENT LIMITED EXCELLENT CROSS REGULATION 500VDC CHANNEL TO CHANNEL ISOLATION HIGH EFFICIENCY: 88% TYPICAL FIXED-FREQUENCY OPERATION OPERATION TO +100C BASEPLATE TEMPERATURE 50 S TRANSIENT RECOVERY, 0-90% LOAD STEP PRIMARY & SECONDARY REMOTE ON/OFF ADJUSTABLE OUTPUT VOLTAGE EXTERNAL SYNCHRONIZATION APPROVED TO UL/CUL1950, EN 60950 DESCRIPTION The VKP100MTC Series are members of the VK high density DC/DC converter family. They are multiple output DC/DC converters offered in a 33-75 input voltage range. Their versatile architecture featuring fully isolated channels enables the system designer to utilize the converter in either a single, dual or triple output scheme without excessive minimum load requirements or cross regulation degradation. The VKP100MTC's architecture results in an economical and practical solution for use in distributed power schemes for today's demanding telecommunication and electronic data processing applications requiring ground separation between noise sensitive digital logic and bipolar analog components. The VKP100xTC's proprietary control circuity responds to 50-100% load steps in 35 Seconds to within 1% of nominal Vout. The peak deviation will not exceed 10% of Vout for pulsed load slew rates in excess of 75 Amps per microsecond. The VKP100MTC is ideal for electronic data processing applications utilizing modern disk drives and low voltage microprocessors that require dynamic load current response while maintaining tight output voltage tolerances. AGENCY APPROVALS PRODUCT SELECTION CHART VOUT INPUT VOLTAGE MODEL VKP100MT312C VKP100MT315C VKP100MT512C VKP100MT515C (VDC) 48 (33-75) RATED OUTPUT VOLTAGE (VDC) Output 1 () 3.3 3.3 5.1 5 Output 2 () 12 15 12 15 Output 3 () 12 15 12 15 IOUT RATED MAXIMUM OUTPUT CURRENT (A) Output 1 30 30 20 20 Output 2 4.2 3.4 4.2 3.4 Output 3 4.2 3.4 4.2 3.4 ISO9001 CERTIFIED For full details go to www.murata-ps.com/rohs www.murata-ps.com Technical enquiries - email: sales@murata-ps.com, tel: +1 508 339 3000 VKP100MTC.B01 Page 1 of 6 VKP100MTC Series 100 Watt, Dual/Triple Output, Half Brick DC/DC Converter INPUT SPECIFICATIONS, ALL MODELS Specifications are at T PARAMETER Input Fusing Voltage Range VKP100MTC Series Reflected Ripple Current Input Ripple Rejection Maximum Input Current VKP100MTC Series No Load Power Dissipation Inrush Charge VKP100MTC Series Quiescent Operating Current Primary On/Off Disabled Secondary On/Off Disabled CONDITIONS MIN CASE = +40C nominal input voltage unless otherwise specified. TYP MAX UNITS 10 A VDC mA dB A W mC mA mA 33 Peak - Peak DC to 1KHz Output Power = 100W VIN = 30V POUT = 0, VIN, Min 75 370 5 6 0.247 7.5 15 10 20 COMMON SPECIFICATIONS, ALL MODELS Specifications are at T PARAMETER ISOLATION Input to Each Output Input to Baseplate Channel to Channel Resistance, Input - Output Capacitance, Input - Output Leakage Current GENERAL Set Point Accuracy Turn-on Time Remote On/Off Control Inputs Primary Sink Current-Logic Low Vlow Vhigh Secondary Sink Current-Logic Low Vlow Vhigh External Synchronization Input Frequency Pulse Width Source Impedence Input High Voltage Input Low Voltage Input Impedance Switching Frequency Weight TEMPERATURE Operation/Specification Storage Shutdown Thermal Inpedance CONDITIONS Peak Test Any Channel to Any Channel MIN 1500 1500 500 10 CASE = +40C nominal input voltage unless otherwise specified. TYP MAX UNITS VDC VDC VDC M pF A, rms 1 5 % mSec 2000 VISO = 240VAC, 60Hz VIN = Nominal, 50% Load Within 1% of Nominal VOUT Open Collector/Drain VIN = VMAX 180 3.5 7 0.8 Open Collector 100 0.4 Open Collector 440 150 4 0 470 470 480 520 320 47 5 1 490 3 (85) +100 +125 +115 8.2 mA V Open Collector/Drain A V KHz nSec V V KHz oz (g) C C C C/W Case Temperature -40 -55 +100 Case to Ambient VKP100MT312C OUTPUT SPECIFICATIONS Specifications are at T PARAMETER Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency CONDITIONS Total Combined O/P Power = 100 Watts Max IO Nom DC to 20MHz* * VIN, Min VIN VIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load 50 to 100% Load Step VOUT, 1% of VOUT, Nom IOUT1=15A, (IOUT2+IOUT3)= 4.2A F.L. VIN=Nominal 4.2 85 150 35 86 250 50 5.0 OUTPUT 1 Min Nom Max 50 3.3 15 100 .02 0.05 0.50 38 30 100 30.0 200 3.80 .05 0.10 1.00 0 CASE = +40C nominal input voltage unless otherwise specified. Min OUTPUT 3 Nom Max 25 12.2 2.1 150 .02 50 4.2 500 .05 UNITS W V A mV V %/C % % A A mV Sec V % OUTPUT 2 Min Nom Max 25 12.2 2.1 150 .02 50 0.5 3.15 4.2 0 500 Dependent on V1 .05 1.0 2.0 See Regulation Curves 6.0 5.0 1.0 2.0 See Regulation Curves 6.0 5.0 38 6.0 6.0 www.murata-ps.com Technical enquiries - email: sales@murata-ps.com, tel: +1 508 339 3000 VKP100MTC.B01 Page 2 of 6 VKP100MTC Series 100 Watt, Dual/Triple Output, Half Brick DC/DC Converter VKP100MT315C OUTPUT SPECIFICATIONS PARAMETER Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency VOUT, 1% of VOUT, Nom IOUT1=15A, (IOUT2+IOUT3) = 3.4A F.L. VIN=Nominal 4.2 85 DC to 20MHz* * VIN, Min VIN VIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load 50 to 100% Load Step 150 35 86 250 50 5.0 mV Sec V % 0.05 0.50 38 30 0.10 1.0 38 1.0 2.0 See Regulation Curves 5.0 4.0 5.0 1.0 2.0 See Regulation Curves 5.0 4.0 5.0 % % A A CONDITIONS Total Combined O/P Power = 100 Watts Maximum IO Nom 0.5 3.15 .02 Min Nom 50 3.3 15 100 30.0 200 3.80 .05 0 Specifications are at TCASE = +40C nominal input voltage unless otherwise specified. OUTPUT 2 Max 100 Min Nom 25 15.85 1.66 125 .02 3.33 0 500 Dependent on V1 .05 Max 50 Min OUTPUT 3 Nom 25 15.85 1.66 125 .02 3.33 500 .05 Max 50 UNITS W V A mV V %/C OUTPUT 1 VKP100MT512C OUTPUT SPECIFICATIONS PARAMETER Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency DC to 20MHz* * VIN, Min VIN VIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load 50 to 100% Load Step CONDITIONS Total Combined O/P Power = 100 Watts Combined IO Nom 0.5 4.75 Specifications are at TCASE = +40C nominal input voltage unless otherwise specified. OUTPUT 1 OUTPUT 2 OUTPUT 3 Min Nom Max Min Nom Max Min Nom Max UNITS 50 5.1 10 100 .02 0.05 0.50 26.0 20.0 200 20 150 5.50 .05 0.10 1.0 0 100 25 12 2.1 150 .02 4.2 0 500 Dependent on V1 .05 50 25 12 2.1 150 .02 4.2 500 .05 50 W V A mV V %/C % % A A mV Sec V % 1.0 2.0 See Regulation Curves 6.0 5.0 1.0 2.0 See Regulation Curves 6.0 5.0 26.0 300 50 7.0 6.0 6.0 VOUT, 1% of VOUT, Nom IOUT1=10A, (IOUT2+IOUT3) = 4.2A F.L. VIN=Nominal 6.0 86 35 87 VKP100MT515C OUTPUT SPECIFICATIONS PARAMETER Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency CONDITIONS Total Combined O/P Power = 100 Watts Max IO Nom DC to 20MHz* * VIN, Min VIN VIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load 50 to 100% Load Step Specifications are at TCASE = +40C nominal input voltage unless otherwise specified. OUTPUT 1 OUTPUT 2 OUTPUT 3 Min Nom Max Min Nom Max Min Nom Max UNITS 50 0.5 5.0 10 100 .02 0.05 0.05 26.0 20.0 200 100 20 150 5.50 .05 1.0 1.0 26.0 300 50 7.0 0 25 15.3 1.66 125 .02 50 3.33 0 500 Dependent on V1 .05 25 15.3 1.66 125 .02 50 3.33 500 .05 W V A mV V %/C % % A A mV Sec V % 4.60 1.0 2.0 See Regulation Curves 5.0 4.0 5.0 1.0 2.0 See Regulation Curves 5.0 4.0 5.0 VOUT, 1% of VOUT, Nom IOUT1=10A, (IOUT2+IOUT3) = 4.2A F.L. VIN=Nominal 6.0 86 35 87 *See Application Notes available on the web at www.cd4power.com www.murata-ps.com Technical enquiries - email: sales@murata-ps.com, tel: +1 508 339 3000 VKP100MTC.B01 Page 3 of 6 VKP100MTC Series 100 Watt, Dual/Triple Output, Half Brick DC/DC Converter TYPICAL PERFORMANCE CURVE TCASE = +40C, nominal input voltage, nominal load, recommended external components applied, unless otherwise specified. (Refer to Application Note DCAN-9 at www.cd4power.com) ABSOLUTE MAXIMUM RATINGS Output Short-Circuit Duration ..................................... Continuous Baseplate Temperature .................................................... +100C Lead Temperature (soldering, 10 seconds max) .............. +300C Storage Temperature ....................................................... +125C Input to Output Isolation ............................................... 1500 VDC ORDERING INFORMATION VKP100 Device Family Indicates 100 Watt Regulated Unit Model Number Selected from Table of Electrical Characteristics Where: X = Input Voltage (M = 48VDC) T = Number of Outputs (Triple "T") Y = 3 for 3.3V, 5 for 5V Z = 12 for 12V, 15 for 15V Lead Length 0.250" - No Number 0.145" - (6) 0.110" - (8) RoHS Compliant MTYZ - L C www.murata-ps.com Technical enquiries - email: sales@murata-ps.com, tel: +1 508 339 3000 VKP100MTC.B01 Page 4 of 6 VKP100MTC Series 100 Watt, Dual/Triple Output, Half Brick DC/DC Converter TYPICAL PERFORMANCE CURVE TCASE = +40C, nominal input voltage, nominal load, recommended external components applied, unless otherwise specified. (Refer to Application Note DCAN-9 at www.cd4power.com) EFFICIENCY vs OUTPUT LOAD 90 VIN = MIN. VIN = NOM. VIN = MAX. FULL LOAD EFFICIENCY vs LOAD DISTRIBUTION 90 VIN = MIN LOAD REGULATION 20 Output Voltage (V) 85 85 15 12.2 11.0 14.0 VKP100xT312C Efficiency (%) Efficiency (%) VIN = MAX 80 80 10 75 75 5 3.3V 70 0.50/0 3.0/0.8 6.0/1.7 9.0/2.5 1 2 / 3 . 3 Iout1/(Iout2 + Iout3)(A) 15/4.2 70 0.5/8.4 15/4.2 Iout1/(Iout2 + Iout3)(A) 30/0 0 0.5/8.4 15/4.2 Iout1/(Iout2 + Iout3)(A) 30/0 EFFICIENCY vs OUTPUT LOAD 90 VIN = MIN. VIN = NOM. VIN = MAX. FULL LOAD EFFICIENCY vs LOAD DISTRIBUTION 90 VIN = MIN LOAD REGULATION 20 18 15.9 85 85 Output Voltage (V) 30/0 15 14.5 VKP100xT315C Efficiency (%) Efficiency (%) VIN = MAX 80 80 10 75 75 5 3.3V 70 0.50/0 3.0/0.7 6.0/1.4 9.0/2.0 12/2.9 Iout1/(Iout2 + Iout3)(A) 15/3.4 70 0.5/6.8 15/3.4 Iout1/(Iout2 + Iout3)(A) 0 0.5/6.8 15/3.4 Iout1/(Iout2 + Iout3)(A) 30/0 EFFICIENCY vs OUTPUT LOAD 90 VIN = MIN. VIN = NOM. VIN = MAX. FULL LOAD EFFICIENCY vs LOAD DISTRIBUTION 90 VIN = MIN VIN = MAX LOAD REGULATION 20 85 85 Output Voltage (V) 15 13.2 10.5 Efficiency (%) Efficiency (%) VKP100xT512C 80 80 10 12.0 75 75 5.1 70 0.50/0 2.0/0.8 4.0/1.7 6.0/2.5 8.0/3.3 Iout1/(Iout2 + Iout3)(A) 10/4.2 70 0.5/8.4 10/4.2 Iout1/(Iout2 + Iout3)(A) 20/0 0 0.5/8.4 10/4.2 Iout1/(Iout2 + Iout3)(A) 20/0 EFFICIENCY vs OUTPUT LOAD 90 VIN = MIN. VIN = NOM. VIN = MAX. FULL LOAD EFFICIENCY vs LOAD DISTRIBUTION 90 VIN = MAX VIN = MIN LOAD REGULATION 20 16.7 85 85 Output Voltage (V) 15 13.9 15.3 VKP100xT515C Efficiency (%) Efficiency (%) 80 80 10 75 75 5 70 0.50/0 2.0/0.9 4.0/1.4 6.0/2.0 8.0/2.7 Iout1/(Iout2 + Iout3)(A) 10/3.4 70 0.5/6.8 10/3.4 Iout1/(Iout2 + Iout3)(A) 20/0 0 0.5/6.8 10/3.4 Iout1/(Iout2 + Iout3)(A) 20/0 www.murata-ps.com Technical enquiries - email: sales@murata-ps.com, tel: +1 508 339 3000 VKP100MTC.B01 Page 5 of 6 VKP100MTC Series 100 Watt, Dual/Triple Output, Half Brick DC/DC Converter MECHANICAL TOP VIEW SIDE VIEW NOTES: All dimensions are in inches (millimeters). PIN PLACEMENT TOLERANCE: 0.005" MECHANICAL TOLERANCE: 0.015" Marked with: specific model ordered, date code, job code. MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance and electrical properties in high humidity environments and over a wide operating temperature range. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is solder plated to allow ease of solderability. *See Ordering Information on page 4 for available lead lengths. PIN CONNECTIONS 1 2 3 4 5 6 7 8 9 10 11 12 PRIMARY ON/OFF -VIN +VIN SYNC IN -V2 +V2 TRIM +V1 -V1 SECONDARY ON/OFF +V3 -V3 USA: UK: France: Japan: Tucson (Az), Tel: (800) 547 2537, email: sales@murata-ps.com Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com Website: www.murata-ps.jp Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Canada: Toronto, Tel: (866) 740 1232, email: toronto@murata-ps.com Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com ISO 9001 REGISTERED 07/28/08 Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. (c) 2008 Murata Power Solutions, Inc. Germany: Munchen, Tel: +49 (0)89-544334-0, email: munich@murata-ps.com China: www.murata-ps.com Technical enquiries - email: sales@murata-ps.com, tel: +1 508 339 3000 VKP100MTC.B01 Page 6 of 6 |
Price & Availability of VKP100MT315C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |